Pipe Repair & Repiping Services

Pipe repair and repiping services stop pinhole leak failures in corroded copper or galvanized steel, restore pressure lost to scaling, and replace deteriorated supply systems before concealed water damage reaches walls and foundations. Bonded Plumbworks’ licensed plumbers have completed hundreds of these projects since 2006, using RIDGID ProPress tools, Milwaukee M18 PEX expansion equipment, and FLIR thermal cameras to join replacement pipe in Type L copper, Uponor AquaPEX, or FlowGuard Gold CPVC per International Plumbing Code specifications.

What Is Pipe Repair and Repiping

Pipe repair addresses localized damage such as leaks, corrosion, cracks, and joint failures in specific sections of a plumbing system. Repiping involves replacing entire pipe runs or the complete piping network throughout a home. Both services restore water pressure, eliminate leaks, and bring outdated piping materials up to current code standards.

Residential plumbing systems common inly include copper, PEX (cross-linked polyethylene), CPVC (chlorinated polyvinyl chloride), PVC (polyvinyl chloride), cast iron, and in older homes, galvanized steel or polybutylene. The Environmental Protection Agency (EPA) and the Plumbing-Heating-Cooling Contractors Association (PHCC) recommend proactive replacement of known-failure materials such as polybutylene, galvanized steel, and lead supply pipes to protect both water quality and structural integrity.

Drain Pipe Slope Requirements for Pipe Repair and Repiping

Signs You Need Pipe Repair or Repiping

• Visible water stains on ceilings, walls, or floors indicating an active leak behind surfaces
• Unexplained increases in your water bill suggesting a hidden leak in the supply system
• Low water pressure at multiple fixtures, pointing to corroded or restricted pipes
• Discolored or rusty water, especially from hot water taps, indicating internal pipe corrosion
• Recurring pinhole leaks in copper pipe, a common issue due to water chemistry
• Blue-green staining on fixtures from corroding copper supply lines
• Polybutylene (poly-b) piping visible in the home, a material prone to catastrophic failure
• Galvanized steel pipes with visible external corrosion and reduced water flow
• Water hammer (banging pipes) when closing faucets or when appliances cycle
• Foundation cracks or slab settlement caused by a leaking pipe beneath the concrete

Our Pipe Repair and Repiping Process

Leak Location and Pipe Assessment

Bonded Plumbworks’ technicians begin with a comprehensive assessment of your plumbing system. We identify pipe materials, age, and condition throughout the home. For active leaks, we use acoustic leak detection equipment, thermal imaging cameras, and moisture meters to pinpoint the exact failure location — even behind walls, above ceilings, and beneath slabs. We map the existing pipe layout to plan the most efficient repair or repiping route. Pipe repair and repiping inspection gives you a clear picture of every problem area in your system. You review the findings and approve the quote before any repair begins.

Material Selection and Scope Planning

Based on the assessment, we recommend targeted repair for isolated issues or whole-house repiping when the pipe material or condition warrants system-wide replacement. We help you select the right replacement material. PEX tubing (Uponor or SharkBite) offers flexibility, corrosion resistance, and faster installation. Copper pipe (Type L or Type M) provides proven durability and is required by some local jurisdictions. CPVC serves as a cost-effective rigid alternative. We provide a written scope of work with material specifications and a fixed-price estimate.

Repair or Repiping Execution

For spot repairs, we isolate the damaged section, cut out the failed pipe, and install new material with proper fittings and supports. For whole-house repiping, we typically run new PEX or copper lines through the attic space — the preferred method in slab-on-grade homes — eliminating the need for slab penetrations. Drain line repairs may also involve the sanitary sewer lateral connecting the home to the municipal main, where corrosion and root intrusion are common failure points. We install new shut-off valves at every fixture, upgrade the main shut-off valve, and add a water hammer arrestor where needed. All connections use approved methods: ProPress for copper, expansion or crimp fittings for PEX, and solvent cement for CPVC and PVC.

Pressure Testing and Inspection

Every repair and repiping project undergoes pressure testing before we close any access points. We pressurize the new piping to 80 PSI (or per local code requirements) and hold for a minimum of 15 minutes, checking every joint and connection for leaks. For permitted repiping projects, we coordinate the required inspection with the local building department to ensure full applicable state building codes compliance.

Restoration and Documentation

After passing the pressure test and inspection, we patch any wall or ceiling openings created for access. We photograph the completed piping before closing walls, providing documentation of the new system layout for your records. You receive a warranty covering both materials and labor.

Pipe Hanger Spacing Requirements for Repiping

Pipe Repair & Repiping Pricing

Pipe repair and repiping costs vary based on the scope, pipe material, and home size. Common price ranges include:

• Single pipe leak repair: $200 – $600
• Burst pipe emergency repair: $400 – $1,200
• Polybutylene pipe replacement (whole house): $4,500 – $9,000
• PEX whole-house repiping: $5,000 – $8,000
• Copper whole-house repiping: $7,000 – $12,000

Pipe repair and repiping estimates are based on a thorough assessment of your plumbing system, pipe material, and home layout. Call Bonded Plumbworks at (855) 557-9600 for a fixed-price written quote.

Equipment and Materials

Our pipe repair and repiping crews use professional-grade tools and approved materials. Cutting and joining equipment includes RIDGID ProPress copper press tools, Milwaukee M12 and M18 PEX expansion tools, Uponor ProPEX expansion fittings, and RIDGID pipe cutters. Detection equipment includes FLIR thermal imaging cameras, acoustic leak locators, and digital moisture meters. Materials include Type L copper pipe, Uponor AquaPEX tubing, FlowGuard Gold CPVC, Schedule 40 PVC, and Watts water hammer arrestors — all rated to applicable state building codes and IPC specifications.

Pipe Material Specifications for Residential Repiping

Why Choose Bonded Plumbworks for Pipe Repair and Repiping

Bonded Plumbworks has performed pipe repairs and whole-house repiping projects since 2006. Our plumbers hold active state plumbing licenses and carry certifications in ProPress copper joining and PEX installation systems. We maintain active membership in the Plumbing-Heating-Cooling Contractors Association (PHCC) and an A+ rating with the Better Business Bureau (BBB). Every repiping project includes pressure testing, inspection coordination, photo documentation, and a written warranty on materials and labor.

Frequently Asked Questions

How much does whole-house repiping cost near me?

Whole-house repiping typically ranges from $4,500 to $12,000 depending on home size, number of fixtures, pipe material selected, and accessibility. A 1,500-square-foot home with 2 bathrooms repiped in PEX through the attic generally falls in the $5,000 to $7,000 range. We provide a detailed written estimate after assessing your specific home.

How long does a whole-house repipe take?

Most residential repiping projects take 2 to 4 days depending on home size and complexity. Single-story slab-on-grade homes with attic access are typically completed in 2 days. Larger homes or those requiring slab work may take 3 to 5 days. We restore water service each evening when possible so you are not without water overnight.

Should I repipe with copper or PEX?

Both materials meet state building code requirements and offer long service lives. Copper has a proven 50-plus-year track record and higher resale perception. PEX costs 30-40% less, installs faster, resists corrosion and scale buildup, and handles freeze events better than copper. PEX is the most common choice for residential repiping due to cost efficiency and resistance to the slightly aggressive water chemistry found in many municipal water supplies.

Is polybutylene piping dangerous?

Polybutylene (poly-b) piping, installed widely from 1978 to 1995, is prone to micro-fractures and sudden failure due to reactions with chlorine and other oxidants in the water supply. Many insurance companies refuse to insure homes with polybutylene piping or charge higher premiums. The PHCC and most plumbing professionals recommend full replacement as a preventive measure.

Does pipe repair and repiping come with a guarantee?

Pipe repair and repiping from Bonded Plumbworks includes a 90-day guarantee on pipe repair and repiping work, covering both parts and labor. Whole-house repiping carries an extended warranty because the entire system is new material with verified connections. If any joint or fitting we installed fails within the guarantee period, we return and repair it at no additional cost.

Schedule Today

Call Bonded Plumbworks at (855) 557-9600 to schedule a pipe assessment or emergency leak repair. Our licensed plumbers provide same-day service for active leaks and free estimates for whole-house repiping projects. Every pipe repair and repiping job includes a 90-day guarantee on pipe repair and repiping work, covering parts and labor.

Bonded Plumbworks’ pipe repair and repiping services are available across Florida — see all service locations.